7 Days Replacement Warranty
Message Us On

Seller's Information

TechnGear

Value
(0/5)
Price
(0/5)

Total Products 35

Linksys Cisco SPA8000-G5 IP Telephone Gateway

Brand: Linksys
Delivery Time: 2-5 Days
Rs. 32,199 Rs.36,999 13% OFF
Rs.32,348
Delivery Charges Rs. 149

Linksys Cisco SPA8000-G5 IP Telephone Gateway Overview and Specifications

Linksys Cisco SPA8000-G5 IP Telephone Gateway available at symbios.pk

Symbios.pk offers a best Linksys Cisco SPA8000-G5 IP Telephone Gateway price in Pakistan with fast shipping in all the major cities of Pakistan. Including Karachi, Lahore, Islamabad, Sialkot, Faisalabad, Peshawar, Quetta, Multan, Rawalpindi and many more cities at the lowest price.

Linksys Cisco SPA8000-G5 IP Telephone Gateway Price in Pakistan is Rs.32,348 as of Tue 26/10/2021

Linksys Cisco SPA8000-G5 IP Telephone Gateway Description

igh-Density VoIP Gateway for Analog Devices

Highlights

   Connect up to eight analog devices to your IP network, such as fax, standard phone, or overhead paging system

   Continue to use existing analog phones on your VoIP system

   Excellent for IP Centrex deployments, providing remote provisioning and support for dynamic, in-service software upgrades

   Clear, high-quality voice communication, using standards based voice codec’s and quality of service

Figure 1.      Cisco SPA8000 8-Port IP Telephony Gateway

C78-504120-01_Figure 01.jpg

Product Overview

The Cisco® SPA8000 8-Port IP Telephony Gateway (Figure 1) is a full-featured analog telephone adapter (ATA) for small businesses, providing enhanced communication services via a broadband connection to the Internet.

The Cisco SPA8000 features eight RJ-11 FXS ports to connect analog telephones to IP-based data networks and includes a single multiport RJ-21 50-pin connector, offering an alternative connection choice when deploying the telephony gateway in varied environments. The device also has one 10/100BASE-T RJ-45 Ethernet interface to connect to either a router or a multilayer switch.

Solid in design, the Cisco SPA8000 is an affordable solution that is ideally suited for use in business and consumer voice over IP (VoIP) service offerings, including call centers and multidwelling environments. Customers can protect and extend their investment by continuing to use their existing analog telephones and teleconferencing equipment.

Installed by the end user and remotely provisioned, configured, and maintained by the service provider, each Cisco SPA8000 converts voice traffic into data packets for transmission over an IP network and uses common standards for voice and data networking for reliable voice and fax operation.

Features

   Toll-quality voice and carrier-grade feature support: The Cisco SPA8000 delivers clear, high-quality voice communication in diverse network conditions. Excellent voice quality in a demanding IP network is achieved via the advanced implementation of standard voice coding algorithms. The SPA8000 is interoperable with common telephony equipment such as voicemail, fax, private branch exchange (PBX), and interactive voice response systems.

   Large-scale deployment and management: The Cisco SPA8000 enables service providers to provide customized services to their subscribers. It can be remotely provisioned and supports dynamic, in-service software upgrades. A highly secure profile upload saves providers the time and expense of managing and preconfiguring or reconfiguring customer premises equipment (CPE).

   Ironclad security: Cisco understands that security for both end users and service providers is a fundamental requirement for a solid, carrier-grade telephony service. The Cisco SPA8000 supports highly secure, encryption-based methods for communication, provisioning, and servicing.

Telephony Features

   Eight voice ports (RJ11) for analog phones or fax machines

   Impedance agnostics: eight configurable settings

   Call waiting, cancel call waiting, call waiting caller ID

   Caller ID with name and number (multinational variants)

   Caller ID blocking

   Call forwarding: no answer, busy, all

   Do not disturb

   Call transfer

   Three-way conference calling with local mixing

   Message waiting indication-visual and tone based

   Call return

   Call back on busy

   Call blocking with toll restriction

   Delayed disconnect

   Distinctive ringing-calling and called number

   Off-hook warning tone

   Selective/anonymous call rejection

   Touch-tone phone keypad configuration with interactive voice response (IVR)

   Fax: G.711 pass-through or real-time fax over IP via T.38 (T.38 support is dependent on fax machine and network/transport resilience)

Specifications

Table 1 contains the specifications and package contents for the Cisco SPA8000 8-Port IP Telephony Gateway. Table 2 compares the SPA8000 with other Cisco Small Business Voice products.

Table 1.       Specifications for the Cisco SPA8000 8-Port IP Telephony Gateway

Specifications

* Note: Many specifications are programmable within a defined range or list of options. Please see the Administration Guide for details. The target configuration profile is uploaded to the SPA8000 at the time of provisioning.

Data networking

  MAC address (IEEE 802.3)
  IPv4 (RFC 791), upgradable to v6 (RFC 1883)
  Address Resolution Protocol (ARP)
  DNS A record (RFC 1706), SRV record (RFC 2782)
  Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)
  DHCP server (RFC 2131)
  Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)
  Internet Control Message Protocol (ICMP) (RFC 792)
  TCP (RFC 793)
  User Datagram Protocol (UDP) (RFC 768)
  Real Time Protocol (RTP) (RFC 1889, 1890)
  Real Time Control Protocol (RTCP) (RFC 1889)
  Differentiated Services (DiffServ) (RFC 2475), type of service (ToS) (RFC 791, 1349)
  VLAN tagging (IEEE 802.1p)
  Simple Network Time Protocol (SNTP) (RFC 2030)
  Upload data rate limiting-static and automatic
  Quality of service (QoS)-voice packet prioritization over other packet types
  MAC address cloning
  Port forwarding
  Session Initiation Protocol (SIP) channels support both UDP and TCP transport
  VPN pass-through with IP Security encapsulating security payload (IPsec ESP), Point-to-Point Tunneling Protocol (PPTP), and Layer 2 Tunneling Protocol (L2TP)

Voice gateway

  SIP v2 (RFC 3261, 3262, 3263, 3264)
   SIP proxy redundancy-dynamic via DNS SRV, A records
   Reregistration with primary SIP proxy server
  SIP support in Network Address Translation (NAT) networks (including Serial Tunnel [STUN])
  Secure (encrypted) calling via prestandard implementation of Secure RTP
  Codec name assignment
   G.711 (a-law and µ-law)
   G.726 (16/24/32/40 kbps)
   G.729 A
   G.723.1 (6.3 kbps, 5.3 kbps)
  Dynamic payload
  Adjustable audio frames per packet
  Fax tone detection pass-through
  Fax pass-though (using G.711)
  Dual-tone multifrequency (DTMF): in-band and out-of-band (RFC 2833) (SIP info)
  Flexible dial plan support with interdigit timers and IP dialing
  Call progress tone generation
  Jitter buffer-adaptive
  Frame loss concealment
  Full-duplex audio
  Echo cancellation (G.165/G.168)
  Voice activity detection (VAD) with silence suppression
  Comfort noise generation (CNG)
  QoS (Ethernet port upstream bandwidth control, physical port, MAC address, application)
  Attenuation/gain adjustments
  Flash hook timer
  Message waiting indicator (MWI) tones
  Visual message waiting indicator (VMWI) via frequency shift keying (FSK)
  Polarity control
  Hook flash event signaling
  Caller ID generation (name and number)-Bellcore, DTMF, European Telecommunications Standards Institute (ETSI)
  Music on hold client
  Streaming audio server-up to 10 sessions
  System dial-on-demand routing (DDR) synchronous dynamic RAM (SDRAM)-16 MB
  System flash ROM-4 MB

Security

  Password-protected system reset to factory default
  Password-protected administrator and user access authority
  Provisioning/configuration/authentication:
   HTTPS with factory-installed client certificate
  Authentication: Extensible Authentication Protocol Transport Layer Security (EAP-TLS), EAP Tunneled Transport Layer Security (EAP-TTLS), and Protected EAP (PEAP)
  SIP TLS
  Up to 256-bit Advanced Encryption Standard (AES) encryption

Provisioning, administration, and maintenance

  Web browser administration and configuration via integral web server
  Telephone keypad configuration with interactive voice prompts
  Automated provisioning and upgrade via HTTPS, HTTP, Trivial File Transfer Protocol (TFTP)
  Asynchronous notification of upgrade availability via NOTIFY
  Nonintrusive, in-service upgrades
  Report generation and event logging
  Stats in BYE message
  Syslog and debug server records
  Per-line and purpose configurable syslog and debug options

Physical interfaces

  8-port standard FXS voice ports (RJ-11)
  RJ-21 (50-pin telco connector) multiport voice connection
  1 WAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3)
  Reset button

Subscriber line interface circuit (SLIC)

  Ring voltage: 40–90 Vpk configurable
  Ring frequency: 20–25 Hz
  Ring waveform: trapezoidal
  Maximum ringer load: 5 ringer equivalence numbers (RENs)
  On-hook/off-hook characteristics:
   On-hook voltage (tip/ring): -46 ~ -56V
   Off-hook current: 18–25 mA
   Terminating impedance: 600 ohm resistive or 270 ohm + 750 ohm
  150 nF complex impedance
  Frequency response 300–3400 Hz
  Return loss (600 ohm, 300–3400 Hz) up to 20 dB
  Insertion loss (1 Vrms at 1 kHz) 3–4 dB
  Total harmonic distortion (THD) (350 mV peak at 300 Hz) up to 3%
  Idle channel noise-72 dB (typical)
  Longitudinal balance 55 dB (typical)
  Off-hook threshold (line seizure) Rdc < 1000 ohm
  On-hook threshold (line release) Rdc >10000 ohm
  Rdc DC supervisory range Rdc > 450 ohm

Regulatory compliance

FCC (Part 15 Class B), CE, ICES-003, C-Tick certification, Restriction of Hazardous Substances (RoHS), UL

Power supply

  Switching type (100–240V) automatic
  DC input voltage: 12V DC at 3.0A max.
  Power adapter: 100–240V, 50–60 Hz AC input

Indicator lights/LEDs

Power, Ethernet, Voice Status, Phone 1 through 8

Documentation

  Quick installation, user, and configuration guides
  Administration guide-service providers only
  Provisioning guide-service providers only

Environmental

Dimensions

W x H x D

6.69 x 1.54 x 8.66 in.

(170 x 39 x 220 mm)

Weight

2.85 lb (1.30 kg)

Operating temperature

32° to 113°F (0° to 45°C)

Storage temperature

-13° to 185°F (-20° to 85°C)

Operating humidity

10% to 90% noncondensing, operating and nonoperating

Storage humidity

10% to 90% noncondensing, operating and nonoperating

Package Contents

  Cisco SPA8000 8-Port IP Telephony Gateway
  12V power adapter
  RJ-45 Ethernet cable
  Quick installation guide